ASROCK K7VM2 CHIPSET DRIVER DOWNLOAD

Fasten the card to the chassis with screws. The lever clicks on the side tab to indicate that it is locked. While CPU overheat is detected, the system will automatically shutdown. Products and corporate names appearing in this guide may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. Please check if the CPU fan on the motherboard functions properly before you resume the system.

Uploader: Mautilar
Date Added: 13 June 2010
File Size: 20.21 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 7209
Price: Free* [*Free Regsitration Required]

The CPU fits only in one correct orientation. There are 2 ways for you to clear and reset the system parameters to the default setup.

Please turn off the computer and unplug the power cord, then you may either short the solder points on CLRCMOS1 by using metal material, e. If the 4 USB 2.

Please remember to remove the paper clip or the jumper cap after clearing the CMOS. Micro ATX form factor 9.

ASRock K7VM2 – motherboard – micro ATX – Socket A – KM266

This Quick Installation Guide contains introduction of the motherboard and step-bystep installation guide for new DIY system builders. In no asroock shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages including damages for loss of profits, loss of business, loss of data, interruption of business and the likeeven if ASRock has been advised of the possibility of such damages arising from any defect or error in the guide or product.

  DAZZLE DVC 100 WINDOWS 7 64 BIT DRIVER DOWNLOAD

DO NOT place jumper caps over these connectors. Installing an expansion card Step 1. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will he subject to change without notice In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice.

When you connect speakers in back panel and front panel at the same time, 1. Match the red marking on the floppy ribbon cable with Chipzet.

ASRock K7VM2, Socket A, AMD Motherboard

Before installing the expansion card, read the documentation of the expansion card and arsock necessary hardware settings for the card. Hold components by the edges and do not touch the ICs 4. While CPU overheat is detected, the system will automatically shutdown. Unplug the power cord from the wall socket before touching any component.

Download ASRock K7VM2 VIA 4 in 1 Driver

For detailed information, please refer to page 13 of user Manual in the Support CD. Please check if the CPU fan on the motherboard functions properly before you resume the system.

Unlock a DIMM slot by pressing the retaining clips outward. If both jumper caps on JL1 and JR1 are removed see fig. More detailed information of the motherboard can be found in the user manual enclosed in the product CD-ROM. You can find the file in the Support CD through the following path: Remove the bracket facing the slot that you intend to use. No part of this installation guide may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.

  ASUS N6600 LINUX DRIVER DOWNLOAD

Fasten the card to the chassis with screws.

Power Management for USB 2. Whenever you uninstali any component, place it on a grounded antistatic pad or in the bag that comes with the component. The setting of the CPU front side bus frequency of this motherboard is by means of the adjustment of jumper-setting.

Please follow the figures above to set the CPU front side bus frequency. It is a menu-driven program, which allows you to scroll through its various sub-menus and to select among the predetermined choices. The data in CMOS includes system setup information such as system password, date, time, and system setup parameters. If no jumper cap is placed on the pins, the jumper is “OPEN”.

To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Installation Pre-iristallation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings.

Supports 2 floppy disk drives Audio: